In a modern kitchen, the core and most important part are none other than the kitchen appliances, because the major functions of the kitchen depending on the kitchen appliances.

At the same time, with the continuous increase of kitchen functions, the increase of various electrical appliances and accessories makes the small kitchen space more cumbersome, and oil smoke and noise also bring certain troubles to life.

Next, I will introduce some tips for kitchen organization, installation, cleaning, and maintenance of kitchen appliances for your reference.

Ordinary kitchen electrical installation

Integrated stove

The installation power supply of the integrated stove is left behind the cabinet next to it or the socket is installed on the side panel of the cabinet next to it.

The air intake pipe and the smoke exhaust pipe are located on the lower side of the side against the wall, which is convenient for the intake air to diffuse, and the convenience of disassembly of the air pipe when maintenance is needed.

There should be no gap between the back of the integrated stove and the wall.

At the same time, the countertops on both sides should be connected to prevent things from falling under the cabinet through the gap in the back.


The installation and design of the range hood should avoid the appearance of the socket and the power cord to achieve overall beauty, and indicate the installation height of the range hood on the drawing.

During the installation process, attention must be paid to the level of the machine body to ensure reliable and safe grounding. The grounding point should be away from flammable and explosive materials.

The exhaust gas should not be discharged into the flue used for exhausting the fumes of combustion gas or other fuels.

Gas stove installation

Put the stove into the stove with holes pre-made, clean the air inlet of the stove, and then put the hose connector into the joint of the stove, and clamp it with the pipe clamp.

Check whether the battery box has batteries, if not, please purchase and install the battery, usually the No. 1 battery.

After the basic installation is completed, open the knob and adjust the gas flame to light blue.

Built-in kitchen appliance installation

The built-in kitchen lamp

It has holes in the ceiling according to the size of the lamp, connect the wires of the lamp, and wrap the interface with electrical tape.

Press the two torsion springs of the lamp upwards to be perpendicular to the level by hand, and hold the torsion spring of the lamp until the lamp and the torsion spring are inserted into the ceiling hole.

The lamps and torsion springs have been inserted into the holes, and the outer ring of the ceiling lamp is pressed to adjust to the proper position.

Integrated stove

When installing the embedded integrated stove, pay attention to the location of water, electricity, gas pipelines, and related plugs, sockets, valves, and so on. In general, the position of the socket and the valve must be arranged to the side of the electrical appliance.

If it is located behind, the electrical appliance cannot be safely seated due to insufficient depth.

The integrated stove must be installed with flameout protection devices, beware of the situation where the wind blows out the fire or the food overflows and the fire is extinguished.

Built-in gas stove

When installing the built-in stove, cover the opening sample plate on the countertop of the cabinet, dig out the embedded hole of the stove according to the size of the opening plate, put the stove in, and confirm that it is firm.

There must be more than 40cm of free space at the bottom of the cooker and more than 100cm of free space at the top.

It is recommended that the width of the countertop should be more than 55cm, and shutter vents must be left in front of the cabinet.

The built-in disinfection cabinet

It should be stably installed in a place that is convenient and stable for operation, maintenance, and should maintain a safe distance of more than 15cm from gas appliances and high-temperature open flames.

When embedded in the cabinet and combined with the cabinet, an air inlet communicating with the disinfection cabinet should be provided at a suitable place in the cabinet installation place to ensure good air supply. Confirm that the power outlet is effectively grounded.

Kitchen appliances cleaning and maintenance

Gas stove cleaning

The surface of the gas stove can be treated with a neutral detergent such as soap powder; the nozzle clogging affects the fire, you can use a thin wire brush to remove the carbides, and use a brush to remove the dirt.

Choosing a built-in stove not only makes the kitchen more beautiful and saves space, but also prevents stains from entering the lower part of the stove, making it easy to clean.


Do not turn off the cooker hood immediately after using it. You can clean the oil on the surface while the oil and gas are still hot.

It can spray the cleaning agent into the range hood. After a period of time, the range hood switch is turned on, and the centrifugal force of the range hood itself is used to remove the oil pollution. The oil net-type range hood needs to be removed and cleaned frequently.

Disinfection cabinet

The cleaning tableware must be dried before entering the cabinet, to prevent water droplets on the surface of the tableware from entering the disinfection cabinet, to make the disinfection cabinet rust, and reduce the life of the disinfection cabinet.

The surface and interior of the disinfection cabinet should be wiped with a clean cloth and neutral detergent frequently.

When stubborn stains are encountered, you can use a damp cloth with neutral detergent on the surface of the stain and wipe it after a period of time.

Common problems in kitchen appliances

Microwave oven

It is forbidden to use the microwave oven for overheating or to put ordinary plastic containers and metal utensils in the microwave oven for heating, and at the same time, do not put closed foods such as eggs, chestnuts, hazelnuts, and unopened milk into the microwave oven for heating.

Gas stove maintenance

Gas stoves often have problems such as tempering, de-fire, black smoke, yellow smoke, air leakage, long open flame, fire is too small, and can not be hit. The reasons behind them are different and can be targeted according to the specific situation. If you can’t solve it by yourself, you can only report for repair.

The integrated stove does not catch fire.

During use, the integrated stove may not catch fire. In some cases, the combustible stove does not catch fire, because there is no gas or poor circuit contact, etc., or the pipeline is blocked, and the ignition needle should also pay attention.

The noise of the range hood is high.

The main reason for the noise of the range hood is the improper installation or unreliable installation. There are also reasons such as the improper installation of the fume and the impeller that will cause excessive noise.

Disinfection cabinet smells

During the disinfection process, the smell of ozone may be caused. The door may not be closed or deformed or the door seal may be damaged. Under normal circumstances, a small amount of ozone may also come out through the dehumidification hole, or it will not be resistant to high temperatures.

Put the plastic, bamboo, and other tableware into it for disinfection.

At this time, the door panel or door seal should be replaced in time, or the plastic items in the disinfection cabinet should be cleaned out.


Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *